Minwax® Ultimate Floor Finish

Minwax® Ultimate Floor Finish works well for any hardwood floor and is ideal for light colored woods like maple and over light colored stains. Its water based formula makes it lower in odor than solvent based products and there is easy clean up with soap and water.


  • Self-crosslinking technology provides a tough floor finish that is great for any hardwood floor
  • Recoat in only two hours - complete your floor finishing project in just one day
  • No sanding between coats
  • Does not amber over time - especially good for use over light colored woods and stains
Sheens
Gloss, Satin, Semi-Gloss, Matte

From Real Homes

Get Inspired

See what’s possible, and then make it happen. Tag @minwaxusa on Instagram to have your project featured.

Application Directions

  • Preparation Warning
    Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
  • APPLICATION STEPS
    • Apply a thin coat using a new synthetic pad applicator. Maintain a wet edge to avoid lap marks.
    • Allow the finish to dry at least two hours, but less than 24 hours. If this timing is followed, no sanding between coats is needed! But if you have let the finish dry for more than 24 hours, sand the finish lightly with 220 grit sandpaper. Do not scuff through to bare wood.
    • Apply a second coat following the steps above.
    • If you are applying Minwax® Ultimate Floor Finish to bare wood, apply a third coat, following the steps above. If this is a "screen and recoat," or if you are applying Minwax® Ultimate Floor Finish over stain, only two coats are required.
    • Floor will bear light foot traffic in 24 hours. Avoid heavy traffic, and do not install rugs or clean floors for seven days. When replacing furniture, do not slide.
    • Apply a second coat following the steps above.
    • If you are applying Minwax® Ultimate Floor Finish to bare wood, apply a third coat, following the steps above. If this is a "screen and recoat," or if you are applying Minwax® Ultimate Floor Finish over stain, only two coats are required.
    • Floor will bear light foot traffic in 24 hours. Avoid heavy traffic, and do not install rugs or clean floors for seven days. When replacing furniture, do not slide.
  • CAUTIONS
    CAUTIONS: Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attentional if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.

Data Sheets:

Product Number Base Container Size SDS PDS
027426131033 Clear 1 Gallon SDS PDS
027426131026 Clear 1 Gallon SDS PDS
027426131019 Clear 1 Gallon SDS PDS
027426131040 Clear 1 Gallon SDS PDS

  • Minwax® Product Warranty
    SATISFACTION GUARANTEE LIMITED WARRANTY. This warranty is made to you, the product purchaser who owns the property where the product is applied. This warranty is not transferable except that if a contractor purchased and applied the product to the property for you, then the warranty is transferable to you. If this product, when applied and maintained according to product application and maintenance instructions to a properly prepared surface, fails to perform to your complete satisfaction, Minwax shall, upon presentation of proof of purchase, either replace an equivalent quantity of product free of charge or refund the original purchase price. For a replacement or refund please contact customer service at 1-800-523-9299. This warranty shall not apply to any defect, damage, or product failure resulting from improper surface preparation, structural defects, environmental damage, failure of a previous product, deterioration or defect in the underlying substrate, or improper application or maintenance of the product. Your exclusive remedy, and Minwax's sole liability, under this warranty is the replacement of product or refund and does not include labor or costs associated with the application or removal of any product. IN NO EVENT SHALL MINWAX BE LIABLE FOR ANY TYPE OF INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, PUNITIVE, OR INDIRECT DAMAGES WHETHER OR NOT PURCHASER IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL HAVE THE SAME DURATION AS THE ABOVE EXPRESS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts or limitations on incidental or consequential damages, so portions of the limitations above might not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state.